There are a number of different 2 Post Lifts on the market. Some of them have Symmetrical arm configurations, while others feature asymmetrical arm configurations. There are a number of different features to consider in Mechanic Superstore journey, including safety, cost, and capacity. This article will provide you with a few options to consider when choosing a 2-post lift for your garage.

Symmetrical arm configuration

A symmetrical arm configuration is one of the most common configurations for a two-post lift. It allows the lift to lift a vehicle in the middle. Symmetrical lifts are ideal for long vehicles and those with loads that are lower to the ground. They are also suitable for smaller vehicles that require limited lifting space.

Symmetrical lifts are more common than asymmetric ones. The choice between the two types is largely dependent on the application and preference of the owner. However, there are some facts that will help you determine which one is best for your needs. Both asymmetric and symmetrical lifts have advantages and disadvantages.

The main advantages of a symmetrical lift include minimizing the risk of damage to the car. Symmetrical lifts are also easier to use than their asymmetric counterparts. They also distribute the weight evenly across both arms and offer a more stable lift.


A 2 post lift has the ability to lift vehicles of varying weights and is ideal for a variety of automotive repairs. Typically, these lifts can raise a vehicle as much as 30,000 pounds, but the capacity of these lifts is limited by their ability to lift the entire vehicle evenly. This is because the bulk of the load may be in the front or rear of the vehicle. For example, a Ford F-450 loaded with tools and a one-man bucket could weigh more than 11,000 pounds, so the two-post lift must be able to support this weight.

Two-post lifts come in a wide variety of styles and capacities, and the better ones will include triple telescoping arms. These are more flexible than the single-stage models, which only feature adjustable heights. Other features to look for in a two-post lift include a safety release with a single or two-point safety latch. Various accessories are also available to extend the height of the lift, such as cradle pads, truck adapters, and column extensions.


When operating a 2-post lift, it is essential to follow the manufacturer's instructions carefully. It is also important not to allow anyone to stand on the lift while operating. You should also not exceed the safe working load, which is clearly indicated on the side of the lift. And when you have finished working on the lift, make sure to fully lower it and turn it off.

The weight capacity of a two-post lift is an important consideration. A two-post lift has four telescoping swing arms. To determine the per-arm capacity of a two-post lift, divide the total lift capacity by the number of swing arms. This will ensure that each arm will be properly loaded.


A two-post car lift is commonly used for most cars and light trucks. They have two lifting posts placed side by side, which are then placed underneath the car to be lifted. These lifts can be purchased with different lifting capacities. The basic model costs around $1,500 and will lift up to 10,000 pounds, while more expensive models can lift up to 14,000 pounds.

Different models offer different lifting capacities and styles. They should be chosen according to the type of work that needs to be done and the type of vehicles you plan to lift. You should also take into consideration the available space for the lift. Depending on the type of vehicle you plan to lift, you may need a two-post lift that is adjustable in height.


To install a two post lift, it is important to consider a few factors. For example, you should ensure the floor is level. Then, you need to dig out holes large enough to fit the columns. They should be about two feet in diameter and ten to twelve inches deep. Once you've completed the hole drilling, you can add concrete to secure the lift. Be sure to follow all specifications and guidelines for the concrete slab.

You should read the instructions on the lift's product to determine the correct distance between the 2post lift and the bay door. It is best to leave at least 13 feet between the lift and the bay door. This will allow for enough room to drive the car in and out of the shop without it sticking out the back door.